CART - $
0.00 
There are some upset owner of an Apple iPhone X who are facing issues related with touch screen not working or responding and also the swipe up and taps on the screen is also not functioning properly. These issues occurred after the iPhone X dropped into water or dropped it on a hard surface or floor. These are the main reason why the touch screen is not responding.
Signs
1. Touch screen not reacting.
2. Not able to Swipe up or can’t do anything on your iPhone.
3. Random Working.
4. The screen turns out to be very lag.
For what reason did this occur on iPhone X Touch Problem?
As all expert realises that iPhone X motherboard has two-piece and it has an additional layer in the center, we so can call this motherboard a SANDWICH Board. iPhone X contact screen connector has set on the base layer, however, all the sign originates from the top layer through the base piece. So when iPhone user dropped their phone in water or harm the housing which bends the logicboard and broke scarcely. Those Solder pads interface the top layer to the base layer and flexibly the signal.
How To Fix It?
When iPhone x touch screen is not working and to fix these issues Please set your multimeter to DIODE mode and check every pin on contact connector with your POSITIVE tests and check whether you get the signal appeared in the photos, So is there is no signal that implies there is NO Signal originating from the top layer and need it to be resoldered. At times it merits checking registers and DIODE and replace it if they are dead.
In the case of nothing works, don’t be over-think. You may just harm things! You have a Mobile Expert to search for! We at YORIT solution will give you whatever is required a fix up the issue. For additional subtleties.
We ascertain that our proficiency in dealing with Mobile Repair in Brisbane is going to save your day. We cater to mobile repair with a limited warranty on the replacement of all parts. To know more contact us and visit our site.
Call us at 0420268712 | Email: info@yorit.com.au