Your keyboard connector got broken?

Here’s how you can repair it at home.

In this article, I will explain how you can repair a broken and damaged keyboard connector on a PC or laptop motherboard.

The connector is an exceptionally sensitive system. It’s extremely simple to get it harmed if you apply an excessive amount of power while attempting to open it. The cable retainer also known as a locking clip is made of plastic and if it’s harmed, you are in a tough situation. Sadly, this part isn’t sold independently.

Well… suppose it occurred. The harm is done.

How to repair it?

When the connector is shut, you need to make sure that the cable stays between the retainer and base.
Then the retainer applies some weight on the cable and it connects with the pins inside the connector. To open it properly, you need to move the retainer around 2 millimeters toward the path that appeared by two yellow bolts.
The retainer must stay connected base.
After this, you can simply detach the keyboard cable and remove the keyboard.
You have to be cautious enough so that you cannot move the retainer excessively far and break it.
However, do not through away the retainer. You despite everything can utilize it again.
Without the locking clip or cable retainer, the cable will not stay inside.

How to repair this sort of damage?

Reposition the broken piece of how it was inserted previously.
Cautiously embed the cable into the connector. For this situation, the cable goes over the retainer.
While holding the cable, cautiously push the broken clip back in the original place. You can use a little screwdriver for that.
The clasp fits firmly into the connector even though it has two broken hooks.
Secure the association with sticky tape and test the keyboard. It should work fine and dandy.
Here’s another connector type. The main difference is that the keyboard cable is directed under the locking clip. Fix it a similar path as the past connector.
This cable is embedded vertically. To open the connector, you’ll need to move the locking clip (earthy colored piece) around 2 millimeters up toward the path that appeared by two yellow bolts.
After that, you can pull the keyboard cable (green bolt) and remove the keyboard. If you move the locking clip excessively far, you can break it.

Let’s suppose one side of the retainer got harmed. Embed the keyboard cable into the connector, position the messed up retainer accurately behind the cable and cautiously push it in. Indeed, even with a wrecked retainer, the link ought to be made sure about inside the connector.

If you still facing problems and want an expert solution then we at Yorit Solutions have specialists who can repair your keyboard connector within no time. We ascertain that our proficiency in dealing with keyboard Repair in Brisbane is going to save your day. We cater to repair your Keyboard with a limited warranty on the replacement of all parts. To know more contact us and visit our site.

Call us at 0420268712 | Email: info@yorit.com.au

Should You Always Choose An iPhone Service Center to Get the Issues with Your Broken iPhone Fixed?(Opens in a new browser tab)

How to choose the best mobile repair expert for your broken phone?(Opens in a new browser tab)

What Solutions Will Work for Your Broken Phones?(Opens in a new browser tab)

Lenovo Bluetooth Series Laptop Screen Repair Expert Brisbane | Yorit Solutions(Opens in a new browser tab)